Print Seller Tools

3D printer cost per hour calculator

Enter what the printer cost, how long it will last and what it uses to see the cost of an hour, and the rate that earns your margin.

The printer
$Example. Include tax and shipping.
$Example. 0 if you would scrap it.
hExample. Hours before you replace it.
Using and looking after it
hExample. Time it is actually running.
$/yrExample. Nozzles, belts, build plates, lubricant.
Power
W
$/kWhExample. Read yours on your bill.

105 W, average while printing PLA.

Failures and margin
%Example. Count your own failed prints for a month.
%A share of the charge, not a markup on cost.

Working it out…

How this is worked out

A printer’s hour has four costs. The machine wears out, it needs parts, it draws power, and some of the hours it runs make a print you cannot sell. Each is worked out per hour, then added up.

Depreciation per hour = (price paid − resale value) ÷ printing life in hours

Maintenance per hour = maintenance a year ÷ (12 × hours printing a month)

Power per hour = watts ÷ 1000 × price per kWh

Cost of an hour that is printed = depreciation + maintenance + power

Cost per good print hour = cost of an hour that is printed ÷ (1 − failed share)

Charge per hour = cost per good print hour ÷ (1 − margin)

The failure step is the one people leave out. If 10% of print hours end in a failed print, only 90% of the hours you pay for give something to sell, so each good hour carries the cost of the other 10%.

Assumptions

  • Every figure except the printer’s watts is an example to show how the tool works, not research. The price, resale value, printing life, hours a month, maintenance, electricity price and failure rate are yours to enter.
  • Depreciation is spread evenly over the printing life you enter. If you would stop using the printer in a few years whatever its hours, use the hours you expect in that time as the life.
  • Maintenance is spread over the hours you print. A printer that sits idle costs the same upkeep per year, so it costs more per hour.
  • Only the machine’s time is counted. Filament is in the filament cost calculator, your own time in the labor cost calculator, and the filament lost in a failed print in the failed print calculator. The price calculator puts them all together with marketplace fees.
  • The margin is a share of the price you charge. A 30% margin on an hour charged at $1.00 leaves $0.30, which is a markup of about 43% on cost.
  • The watts are the makers’ own figures. The electricity calculator explains what they mean and compares printers.

Preset figures and where they come from

Each figure was read on the company’s own page, checked on 15 November 2026.

PresetFigureSource
Bambu Lab A195 Wwiki.bambulab.com
Bambu Lab A1 mini80 W
Bambu Lab P1S105 W
Bambu Lab X1 Carbon105 W
Bambu Lab P2S200 W
Bambu Lab H2D197 W
Bambu Lab H2S200 W
Bambu Lab H2C200 W
Bambu Lab X2D250 W
Prusa MK4S80 Wprusa3d.com
Prusa Core One90 Wprusa3d.com

Every preset is only a starting value. Change any field if your account, country or plan differs.

Questions sellers ask

How much does it cost to run a 3D printer per hour?

With the example figures on this page, $0.19 for each hour that makes a good print. That is $0.11 of depreciation ($700 paid, $150 resale, 5,000 hours), $0.04 of maintenance ($60 a year over 120 hours a month), $0.02 of power (105 W at $0.20 per kWh), plus $0.02 for the 10% of hours lost to failures. Your figures will differ, so enter yours.

How much should I charge per hour for 3D printing?

At least the cost per good hour, plus the margin you want. With the example figures, a 30% margin means charging $0.27 an hour for machine time. That covers the machine only. Filament, your own time and marketplace fees go on top, which the price calculator adds.

Is depreciation really part of the cost of a print?

Yes. A printer used for sales has a limited life, and every hour it runs uses some of it. Leaving it out makes printing look cheaper than it is. Spreading $550 of lost value over 5,000 hours puts $0.11 into every hour, and the figure falls if the printer lasts longer than you assumed.

What failure rate should I use?

Use your own. Count the hours spent on prints you threw away over a month and divide by the hours the printer ran. At 10% each good hour costs about 11% more than an hour printed, because the cost is divided by 0.9. At 25% it costs a third more. No published figure fits every printer and every seller, so the field starts as an example.

What is the difference between cost per hour and the price of a print?

Cost per hour is only the machine. The price of a print also needs the filament, your handling time, packaging, marketplace fees and tax. A 2.5 hour print on the example machine carries about $0.48 of machine cost, which is a small part of most prices. The print time calculator turns a slicer estimate into hours and prices the machine time.